Skip to content

UpdateMidplaneSbbCpld

Updates the Midplane Storage Bridge Bay (SBB) CPLD firmware of managed systems installed directly on the NVMe backplane, using the given CPLD firmware image.

Syntax

OOB

saa -i <IP or host name> -u <username> -p <password> -c UpdateMidplaneSbbCpld --file <filename> --index <id> --reboot [--post_complete]

Multiple Systems OOB

saa -l <system list file> [-u <username> -p <password>] -c UpdateMidplaneSbbCpld --file <filename> --index <id> --reboot [--post_complete]

Options

  • --file <file name>: Updates the Midplane SBB CPLD with the given CPLD image file.
  • --reboot: Forces the managed system to reboot or power up after operation.
  • --index <number>: Sets the CPLD index.
  • --post_complete: (Optional) Waits for the managed system's POST to complete after rebooting.
  • --individually: (Optional) Updates each Midplane SBB CPLD with its corresponding image file individually.

Examples

OOB

[SAA_HOME]# ./saa -i 192.168.34.56 -u ADMIN -p PASSWORD -c UpdateMidplaneSbbCpld --file MidplaneSBB_CPLD.jed --index 1 --reboot --post_complete

Multiple Systems OOB

[SAA_HOME]# ./saa -l SList.txt -u ADMIN -p PASSWORD -c UpdateMidplaneSbbCpld --file MidplaneSBB_CPLD.jed --index 1 --reboot

Output

Managed system.....................192.168.34.56
 Midplane SBB CPLD 1 version....CPLD_ID: 0000 REV: 02
Local CPLD image file..............MidplaneSBB_CPLD.jed
Status: Start updating Midplane SBB CPLD for 192.168.34.56
************************************WARNING*************************************
 Do not remove AC power from the server.
********************************************************************************
Uploading FW...Done
Preparing updating...................Done
Updating FW...>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Done
Rebooting target system.................................................Done
Status: The managed system 192.168.34.56 is waiting for POST complete
......
Status: MemoryInitializationStarted
.......................................
Status: PCIResourceConfigStarted
.....
.................
Status: The managed system 192.168.34.56 is POST completed
Status: Midplane SBB CPLD is updated for 192.168.34.56

Notes

  • This command is supported on systems equipped with a Midplane board.