Skip to content

GetSwitchboardCpldInfo

Gets the firmware information for all switchboard CPLDs (Main, Left, Right) installed on the managed system. Supported on CPLD RoT systems of X13/H13 and later platforms. Currently only supported through Redfish communication, so in-band usage can only be done through the Redfish Host Interface.

Syntax

OOB

saa -i <IP or host name> -u <username> -p <password> -c GetSwitchboardCpldInfo

In-Band

saa -I Redfish_HI -u <username> -p <password> -c GetSwitchboardCpldInfo

Multiple Systems OOB

saa -l <system list file> [-u <username> -p <password>] -c GetSwitchboardCpldInfo

Options

None.

Examples

OOB

[SAA_HOME]# ./saa -i 192.168.34.56 -u ADMIN -p PASSWORD -c GetSwitchboardCpldInfo

Multiple Systems OOB

[SAA_HOME]# ./saa -l SList.txt -u ADMIN -p PASSWORD -c GetSwitchboardCpldInfo

Output

The console output contains information for all switchboard CPLDs that can be updated:

Managed system.....................192.168.34.56
 [Main Switchboard]
 CPLD 1 version.............10
 CPLD 2 version.............0F
 [Left Switchboard]
 CPLD 2 version.............32
 [Right Switchboard]
 CPLD 2 version.............3F

Switchboard CPLD Types

Type Description
Main Switchboard It is possible to install many main switchboards.
Left Switchboard It is possible to install many left switchboards. Left switchboard can only be displayed if the system has fully booted up.
Right Switchboard It is possible to install many right switchboards. Right switchboard can only be displayed if the system has fully booted up.

Notes

  • DO NOT update CPLD firmware with a wrong index.
  • If the execution "Status" field for the managed system is SUCCESS, the information will be shown in the "Execution Message" section of the managed system in the created log file.
  • Left/Right Switchboard CPLD #1 is not supported for the user to get information about.
  • Limitation: when the system is in the process of powering up, this command can fail. Wait for the system to fully boot up and try again.