ChassisIntrusion

Gets and clears the status of the chassis intrusion sensor. If a hardware intrusion is detected, the status is "Hardware Intrusion"; otherwise it is "Normal". This command can either get the status or set the status to "Normal".

Syntax

OOB

saa -i <IP or host name> -u <username> -p <password> -c ChassisIntrusion --action {Clear | Status}

In-Band

saa [-I Redfish_HI -u <username> -p <password>] -c ChassisIntrusion --action {Clear | Status}

Multiple Systems OOB

saa -l <system list file> [-u <username> -p <password>] -c ChassisIntrusion --action {Clear | Status}

Options

• --action <action>: Sets action:
  • 1 = Status
  • 2 = Clear

Examples

OOB

[SAA_HOME]# ./saa -i 192.168.34.56 -u ADMIN -p PASSWORD -c ChassisIntrusion --action Status

In-Band

[SAA_HOME]# sudo ./saa -i 192.168.34.56 -u ADMIN -p PASSWORD -c ChassisIntrusion --action Clear

Multiple Systems OOB

[SAA_HOME]# ./saa -l SList.txt -u ADMIN -p PASSWORD -c ChassisIntrusion --action Status

SList.txt:

192.168.34.56
192.168.34.57

If the execution "Status" field for a managed system is SUCCESS, the chassis intrusion information of the managed system is shown in the "Execution Message" section in the created log file.

Output

Status

Managed system................localhost
Intrusion Sensor..........Normal

Clear

Chassis intrusion has already been cleared.