Skip to content

SetBladePowerAction

Applies a power action to the whole Blade system, a single blade, or a specific node of a Blade system.

Syntax

OOB

saa -i <IP or host name> -u <username> -p <password> -c SetBladePowerAction --action <action> --blade <Blade Index> [--node <Node Index>]

Multiple Systems OOB

saa -l <system list file> [-u <username> -p <password>] -c SetBladePowerAction --action <action> --blade <Blade Index> [--node <Node Index>]

Options

  • --action <action>: Sets power action with:
  • 0 = down
  • 1 = up
  • 2 = cycle
  • 3 = reset
  • 4 = softshutdown
  • 24 = accycle
  • --blade [<Blade Index> | ALL]: Assigns blade index. [A1-A14], [B1-B14], or ALL.
  • --node <Node Index>: Assigns node index. [1-4] (optional).

Examples

OOB

[SAA_HOME]# ./saa -i 192.168.34.56 -u ADMIN -p PASSWORD -c SetBladePowerAction --action down --blade ALL
[SAA_HOME]# ./saa -i 192.168.34.56 -u ADMIN -p PASSWORD -c SetBladePowerAction --blade ALL --action reset
[SAA_HOME]# ./saa -i 192.168.34.56 -u ADMIN -p PASSWORD -c SetBladePowerAction --blade A1 --action softshutdown

Multiple Systems OOB

[SAA_HOME]# ./saa -l SList.txt -u ADMIN -p PASSWORD -c SetBladePowerAction --action down --blade ALL
[SAA_HOME]# ./saa -l SList.txt -u ADMIN -p PASSWORD -c SetBladePowerAction --blade ALL --action reset
[SAA_HOME]# ./saa -l SList.txt -u ADMIN -p PASSWORD -c SetBladePowerAction --blade A1 --action softshutdown

Notes

  • To apply a power action to the whole Blade system, you only need to assign a power action.
  • To apply a power action to a specific single Blade system, you must assign a power action and the --blade option with an index.
  • To apply a power action to a specific node of a Blade system, you must assign a power action and both the --blade and --node options with indexes.
  • If the execution Status field for a managed system is SUCCESS, the console output of the managed system will be shown in the Execution Message section of the created log file.