Skip to content

RawCommand

Sends an IPMI or IPMB raw command to the target system.

Syntax

IPMI Raw Command

Single System OOB

saa -i <IP or host name> -u <username> -p <password> -c RawCommand --raw <raw command>

Single System In-Band

saa -c RawCommand --raw <raw command>

Multiple Systems OOB

saa -l <system list file> [-u <username> -p <password>] -c RawCommand --raw <raw command>

IPMB Raw Command

Single System OOB

saa -i <IP or host name> -u <username> -p <password> -c RawCommand --ipmb <raw command>

Single System In-Band

saa -c RawCommand --ipmb <raw command>

Multiple Systems OOB

saa -l <system list file> [-u <username> -p <password>] -c RawCommand --ipmb <raw command>

Options

  • --raw <raw command>: Inputs hex-value commands.
  • --ipmb <raw command>: Inputs hex-value commands.

Examples

IPMI Raw Command (OOB)

[SAA_HOME]# ./saa -i 192.168.34.56 -u ADMIN -p PASSWORD -c RawCommand --raw '06 01'
[SAA_HOME]# ./saa -i 192.168.34.56 -u ADMIN -p PASSWORD -c RawCommand --raw '0x06 0x01'

IPMI Raw Command (In-Band)

[SAA_HOME]# ./saa -c RawCommand --raw '06 01'
[SAA_HOME]# ./saa -c RawCommand --raw '0x06 0x01'

IPMI Raw Command (Multiple Systems OOB)

[SAA_HOME]# ./saa -l SList.txt -u ADMIN -p PASSWORD -c RawCommand --raw '06 01'
[SAA_HOME]# ./saa -l SList.txt -u ADMIN -p PASSWORD -c RawCommand --raw '0x06 0x01'

IPMB Raw Command (OOB)

[SAA_HOME]# ./saa -i 192.168.34.56 -u ADMIN -p PASSWORD -c RawCommand --ipmb '00 2C 2E D3 57 01 00 10'
[SAA_HOME]# ./saa -i 192.168.34.56 -u ADMIN -p PASSWORD -c RawCommand --ipmb '0x00 0x2C 0x2E 0xD3 0x57 0x01 0x00 0x10'

IPMB Raw Command (In-Band)

[SAA_HOME]# ./saa -c RawCommand --ipmb '00 2C 2E D3 57 01 00 10'
[SAA_HOME]# ./saa -c RawCommand --ipmb '0x00 0x2C 0x2E 0xD3 0x57 0x01 0x00 0x10'

Output

IPMI Raw Command

00
20 01 09 95 02 BF 7C 2A 00 7A 09 00 10 00 00

IPMB Raw Command

00
57 01 00 4C 00

Notes

  • A raw command must be enclosed in quotation marks.
  • If the execution "Status" field for a managed system is SUCCESS, the BIOS and BMC capabilities of the managed system will be shown in the "Execution Message" section in the created log file (multiple systems OOB usage).